Parasternal long axis

Accuracy dispute This website is currently being developed and in a testing phase.
Content is incomplete and may be incorrect.
Author I.A.C. van der Bilt
Moderator I.A.C. van der Bilt
Supervisor
some notes about authorship
Image showing the left parasternal long axis transection (PSLAX) of the heart by the ultrasound waves

How to Get a Good PLAX View

To get a good PLAX view, begin with placing the transducer in the third or fourth intercostal space and adjust as necessary, moving a few intercostals spaces up or down. Better results are obtained if the patient is placed in a left lateral decubitus position. This will allow better visualization of the mid-portion and base of the left ventricle, both leaflets of the mitral valve, the aortic valve and the aortic root, the left atrium and the right ventricle. [1] The transducer is traditionally moved and pointed toward the right shoulder to parallel the beam to the major axis of the left ventricle and to pass it through the center of the left ventricular chamber. Gradual medial to lateral angulation until the left ventricle size is at its maximum will allow one to see the minor axis at its maximal state and the mitral valve leaflet excursion at its greatest. Minor axis dimensions may then be viewed and recorded.

Purposes of Getting a Good Parasternal Long Axis (PLAX) View

Echocardiographic examination of the heart usually begins with a PLAX view. Acquiring a good PLAX view is important to assess left ventricular contractility and to determine the presence of pericardial effusion and right ventricular strain.

Characteristics of a Good PLAX View

One will be able to know of a good PLAX view is taken when the septum is oriented almost horizontally, clearly delineating between the left and right side of the heart, and the apex of the of the left ventricle and the tricuspid valve are not visualized. The mitral and aortic valves, however, should be visible.

Structures that can be seen in the PLAX view

 
Schematic diagram of the different structures seen in a good PLAX view.
  • Right ventricle
  • Left ventricle
  • Mitral valve
  • Left atrium
  • Descending aorta
  • Aortic valve
  • Aortic root
  • Pericardium
  • Right ventricular inflow and outflow tracts


2D Echo Measurements

Majority of measurements are done with 2D echo imaging. Once the best diastolic frame having the largest left ventricular cavity is chosen, septal and posterior wall thickness, left ventricular diastolic cavity, and aortic root diameter can be determined. Use a systolic frame to measure the dimensions of the left ventricle and the left atrial diameter.

M-Mode Echo Measurement

 
Image showing the left parasternal long axis transection (PSLAX) of the heart by M-mode imaging.

Determining left ventricular dimensions and ejection fraction are few of the cases wherein M-mode imaging is used. It is one-dimensional and usually relies on the correct alignment of the M-mode along the left ventricle.

Using Color Doppler Ultrasound

It is sometimes necessary to use color Doppler ultrasound when valvular regurgitation is suspected, although this method should not be used to as the final diagnostic tool to determine valve dysfunction as the Doppler beam is nearly perpendicular to the flow. Instead, the presence of valvular regurgitation is based on the cardiac cycle, not the color-coding.[2]

Example

This is a parasternal long axis view of a normal heart.

<flash>file=PLAXnormal.swf
A parasternal long axis
 enlarge

 download avi file to use in your powerpoint presentation


References

  1. ISBN:1848822928 [Nihoyannopoulos]
  2. ISBN:0781795575 [Feigenbaum1]

External links